To Next PageTo Next PageWhat to do if NordicTrack 2150 Treadmill power turns off during use?
If the power turns off during use, check the power switch. Also, ensure the power cord is properly plugged in. If it is, unplug it, wait five minutes, and then plug it back in.
How to fix NordicTrack 2150 incline that does not change correctly?
If the incline of your treadmill does not change correctly, calibrate the incline system.
Why does my NordicTrack 2150 Treadmill walking belt slow down when I walk on it?
Several factors can cause the walking belt to slow down. Use only a single-outlet surge suppressor that meets all of the specifications described in the manual. If the walking belt is overtightened, it may decrease treadmill performance and damage the belt; remove the key and unplug the power cord, then use a hex key to turn both idler roller screws counterclockwise 1/4 of a turn. Your treadmill also features a walking belt coated with high-performance lubricant.
What to do if the buttons on the NordicTrack 2150 screen do not work correctly?
If the screen is not properly calibrated, calibrate the screen.
What to do if NordicTrack 2150 iFit mode does not function correctly?
Make sure that the treadmill has the most current firmware available.
General| Running Area | 22" x 60" |
|---|---|
| Speed | 0-12 MPH |
| User Capacity | 300 Lbs |
| Bluetooth | Yes |
| Cooling Fan | Yes |
| Decline | -3% |
| Audio | Dual Speakers |
Common issues and solutions for the chest heart rate monitor not functioning properly.
Steps for connecting the treadmill to a power source using a surge suppressor.
Step-by-step instructions for folding the treadmill for storage.
