NordicTrack 24860.2 User Manual (English)

Questions and Answers:

J
Joanne JohnsonAug 3, 2025
How to turn on NordicTrack Treadmill?
- A
  Alexis YoungAug 3, 2025
  First, ensure the power cord is securely plugged into a surge suppressor, and the surge suppressor is connected to a properly grounded outlet. Then, verify that the key is correctly inserted into the console. Also, check the power switch located on the treadmill frame near the power cord. If the switch protrudes, wait five minutes before pressing it back in to reset it. If your treadmill is connected to an AFCI-equipped outlet and your circuit breaker trips repeatedly when the treadmill is used, see the front cover of this manual to purchase an arc filter.
S
sbrownAug 8, 2025
What to do if NordicTrack 24860.2 Treadmill turns off during use?
- H
  Hannah WrightAug 8, 2025
  If your NordicTrack Treadmill turns off during use, check the power switch first. Ensure the power cord is properly plugged in; if it is, unplug it, wait five minutes, and then plug it back in. Also, try removing and reinserting the key from the console. If the treadmill still won’t run, please see the front cover of this manual.
S
Shawn PriceAug 15, 2025
How to fix NordicTrack Treadmill walking belt slipping?
- D
  don66Aug 15, 2025
  To fix a slipping walking belt on your NordicTrack Treadmill, first remove the key and unplug the power cord. Use the hex key to turn both idler roller screws clockwise, 1/4 of a turn. The walking belt is correctly tightened when you can lift each edge of the walking belt 2 to 3 inches off the walking platform. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
B
Brian SchaeferAug 20, 2025
Why does NordicTrack 24860.2 Treadmill walking belt slow down when I walk on it?
- B
  Barry MartinezAug 20, 2025
  If the walking belt on your NordicTrack Treadmill slows down when you walk on it, it might be overtightened, which can decrease performance and damage the belt. To resolve this, remove the key and unplug the power cord. Using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn. If you suspect that the walking belt needs more lubricant or if the walking belt still slows when walked on, see the front cover of this manual.
C
Christopher CunninghamAug 27, 2025
What to do if NordicTrack Treadmill walking belt is not centered?
- N
  Nancy RobertsAug 27, 2025
  If your NordicTrack Treadmill walking belt is not centered, first remove the key and unplug the power cord. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is centered.

NordicTrack 24860.2 Specifications

General

Incline	0-12%
Speed	0-12 MPH
Weight Capacity	300 Lbs
Bluetooth	Yes
Cooling Fan	Yes
Audio	Dual 2" Speakers
iFit Compatible	Yes
Folding	Yes
Heart Rate Monitoring	EKG Grip Pulse Sensors
Programs	iFit Enabled