NordicTrack 25021.1 - Page 14

14
10. Set the console assembly (G) on the Handrails
(84). Make sure that no wires are pinched.
Insert the excess Upright Wire (81) into the Right
Upright (90).
Attach the console assembly to the brackets on
the Handrails (84) with four 1/4" x 1/2" Screws
(4); do not tighten the Screws yet.
11. Attach the Pulse Crossbar (31) to the console
assembly (G) with six #8 x 1/2" Screws (1); start
all six Screws, and then tighten them.
Firmly tighten the four 1/4" x 1/2" Screws (4).
10
11
90
G
G
4
4
4
4
81
84
31
1
1
84