M
mcneilsamanthaJul 25, 2025
How to fix NordicTrack Treadmill when the power does not turn on?
- MMichael FreemanJul 25, 2025
First, ensure the power cord is properly plugged into a surge suppressor, which is, in turn, connected to a grounded outlet. Use a single-outlet surge suppressor meeting specific requirements. Note that the treadmill isn't compatible with GFCI outlets. Also, verify that the key is fully inserted into the console after plugging in the power cord. Finally, check the reset/off circuit breaker on the treadmill frame near the power cord. If the switch is protruding, reset it by waiting five minutes before pressing it back in.