9
4. Hold the Right Upright (90) against the Base
(8). Be careful not to pinch the wires. Partially
tighten three 3/8" x 4" Screws (7) with three 3/8"
Star Washers (13) into the Right Upright and the
Base; do not fully tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way. Note: There are no wires on the left
side.
90
4
7
13
8
Wires
5. Identify the Left and Right Base Covers (82, 83).
Slide the Left and Right Base Covers onto the
Left and Right Uprights (89, 90) as shown. Do
not press the Left and Right Base Covers into
place yet.
83
90
82
89
5
To Next Page
Loading...
Need help?
General
