NordicTrack E 6.3 Elliptical User Manual

10
7
8. Identify the Right Upper Body Arm (25) and ori-
ent it as shown. Do not insert the Right Upper
Body Arm into the Right Upper Body Leg (26)
yet.
Apply some of the included grease to the axle on
the right side of the Upright (4).
Slide the Right Upper Body Arm (25) onto the
right side of the Upright (4). Attach the Right
Upper Body Arm with an M8 x 18mm Screw
(109) and an M8 Washer (103).
Repeat this step to attach the Left Upper
Body Arm (27) to the Upright (4).
7. Apply some of the included grease to an Arm
Axle (93).
Insert the Arm Axle (93) into the Right Pedal Arm
(37), through an Arm Spacer (120), and into the
Right Roller Arm (39).
Then, tighten an M10 x 20mm Screw (107) with
an M10 Washer (111) into each end of the Arm
Axle (93) at the same time.
Repeat this step to attach the Left Pedal Arm
(38) to the Left Roller Arm (40).
39
25
27
4
103
109
37
120
93
38
107
107
111
111
Grease
Grease
8
26
40

NordicTrack E 6.3 Elliptical Specifications

General

Brand	NordicTrack
Model	E 6.3 Elliptical
Category	Elliptical Trainer
Language	English