NordicTrack Elite 10.9i - Of the Packing Materials (Not Shown) under the

9
3
2
106
15
3. Press the Cover Mounts (106) on the underside
of the Rear Stabilizer Cover (15) into the Rear
Stabilizer (2).
4
4. With the help of a second person, place some
of the packing materials (not shown) under the
front of the Frame (1). Have the second per-
son hold the Frame to prevent it from tipping
while you complete this step.
Next, attach the Front Stabilizer (6) to the Frame
(1) with two M10 x 122mm Screws (104) and two
M10 Split Washers (79).
Then, remove the packing materials from under
the front of the Frame (1).
1
6
79
79
104