19
42. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley to the lower
half of the Pulley Frame (22) with a 3/8Ó x 1 3/4Ó Bolt
(57) and a 3/8Ó Nylon Locknut (50).
42
50
24
43. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the welded bracket on the Weight Base
(5) with a 3/8Ó x 2Ó Bolt (54) and a 3/8Ó Nylon Locknut
(50). Make sure the Cable Trap is oriented as
shown.
Route the Low Cable (75) through the welded bracket
on the Press Base (6) as shown.
43
75
5
6
44. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley to the weld-
ed bracket on the Press Base (6) with a 3/8Ó x 1 3/4Ó
Bolt (57) and a 3/8Ó Nylon Locknut (50).
44
24
75
57
50
6
57
75
22
Welded
Bracket
45. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the lower hole in the Adjustable Pulley
Plates (23) with a 3/8Ó x 2Ó Bolt (54) and a 3/8Ó Nylon
Locknut (50). Make sure the Cable Trap is oriented
as shown.
45
50
23
54
75
25
24
Welded
Bracket
Welded
Bracket
50
25
24
54
To Next Page
Loading...
