12
15
4
8
34
15. Attach the Accessory Tray (8) to the Upright (4)
with two M4 x 18mm Truss Screws (34).
19
D
21
C
16. Identify the Right Pedal (21). Using an adjust-
able wrench, firmly tighten the Right Pedal
clockwise into the Right Crank Arm (19).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm
(not shown). IMPORTANT: You must turn the
Left Pedal counterclockwise to attach it.
To adjust the pedal straps (C), see HOW TO
ADJUST THE PEDAL STRAPS on page 14.
16
To Next Page
Loading...
