EasyManua.ls Logo

NordicTrack NTEX71021.0 - Assembly Instructions (Continued); Pedal Installation and Power Connection

NordicTrack NTEX71021.0
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
16. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Extra parts may be included. Place a mat beneath the exercise bike to protect the floor.
62
61
14. Identify the Right Pedal (62). Using your fingers,
turn the Right Pedal about halfway into the Right
Crank Arm (64). Then, use an adjustable wrench
or the included tool to fully tighten the Right
Pedal.
Repeat this step with the Left Pedal (61).
IMPORTANT: You must turn the Left Pedal
COUNTERCLOCKWISE to attach it.
To adjust the straps on the Pedals (61, 62),
see HOW TO USE THE PEDAL STRAPS on
page 15.
14
64
15. IMPORTANT: Always plug the Power Adapter
(67) into the exercise bike before you plug it
into an outlet.
Plug the Power Adapter (67) into the Power
Receptacle (2) on the exercise bike.
Note: To plug the Power Adapter (67) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 14.
To register your product and activate your
warranty today, go to my.nordictrack.com.
15
67
2

Related product manuals