EasyManuals Logo

NordicTrack NTEX84017.2 User Manual

NordicTrack NTEX84017.2
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
MAINTENANCE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the exercise bike is used.
Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild soap. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
The console requires activation. If you have not
activated the console, see assembly step 17 on
page 14.
If the console does not display your heart rate when
you use the handgrip heart rate monitor, see step 5 on
page 19.
If lines appear in the console display, see HOW TO
CHANGE CONSOLE SETTINGS on page 23 and
adjust the contrast level of the display.
If a replacement power adapter is needed, call the
telephone number on the cover of this manual.
IMPORTANT: To avoid damaging the console, use
only a manufacturer-supplied regulated power
adapter.
TABLET HOLDER TROUBLESHOOTING
If the tablet holder does
not stay in place, rotate
the tablet holder backward
and tighten the screw (A)
until the tablet holder stays
in place when it is rotated
to the desired position.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed
switch, first unplug the
power adapter. Next,
use a standard screw-
driver and release the
tabs on the Accessory
Tray (5), and then lift
the Accessory Tray
away from the frame.
Next, locate the Reed Switch (78). Slightly loosen the
M4 x 12mm Washer Head Screw (65).
Then, rotate the Pulley (75) until a Magnet (67) is
aligned with the Reed Switch (78). Slide the Reed
Switch slightly toward or away from the Magnet. Then,
retighten the M4 x 12mm Washer Head Screw (65).
Plug in the power adapter and rotate the Pulley (75)
for a moment. Repeat these actions until the console
displays correct feedback.
When the reed switch is correctly adjusted, reattach
the accessory tray and plug in the power adapter.
A
5
65
78
67
75
MAINTENANCE AND TROUBLESHOOTING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NordicTrack NTEX84017.2 and is the answer not in the manual?

NordicTrack NTEX84017.2 Specifications

General IconGeneral
BrandNordicTrack
ModelNTEX84017.2
CategoryExercise Bike
LanguageEnglish

Related product manuals