To Next PageTo Next PageWhat to do if my NordicTrack NTL99115.1 power turns off during use?
If your NordicTrack Treadmill's power turns off during use, first check the power switch; if it's tripped, wait five minutes before pressing it back in. Ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, try removing and reinserting the key from the console.
How to fix a NordicTrack Treadmill that does not turn on?
If your NordicTrack Treadmill doesn't turn on, ensure the power cord is plugged into a surge suppressor and that the suppressor is plugged into a grounded outlet. Also, make sure the key is properly inserted into the console. Check the power switch on the treadmill frame; if it's protruding, wait five minutes, then press it back in to reset it.
Why does the walking belt on my NordicTrack NTL99115.1 Treadmill slow down when I walk on it?
If the walking belt on your NordicTrack Treadmill slows down when you walk on it, be aware that overtightening the walking belt can reduce treadmill performance and damage the belt. If the belt slips, remove the key and unplug the power cord. Use a hex key to turn both idler roller screws clockwise by 1/4 of a turn. When correctly tightened, you should be able to lift each edge of the belt 2 to 3 inches off the platform.
How to fix a NordicTrack Treadmill walking belt that is off-center?
If the walking belt on your NordicTrack Treadmill is off-center or slips, first remove the key and unplug the power cord. If the belt has shifted left, turn the left idler roller screw clockwise 1/2 turn with a hex key; if it has shifted right, turn the left idler roller screw counterclockwise 1/2 turn. Avoid overtightening the belt. Plug the power cord back in, insert the key, and run the treadmill for a few minutes. Repeat this process until the belt is centered.
What to do if NordicTrack Treadmill walking belt slips?
If the walking belt on your NordicTrack Treadmill slips when walked on, remove the key and unplug the power cord first. Then, use a hex key to turn both idler roller screws clockwise by 1/4 of a turn. When correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform. Plug the power cord back in, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
General| Speed | 0 - 12 MPH |
|---|---|
| Speed Range | 0 - 12 MPH |
| Display | 7" Backlit Display |
| Foldable | Yes |
| Motor | 2.75 CHP |
| Decline | Yes |
| User Weight Capacity | 300 lbs |
| Weight Capacity | 300 lbs |
Details plans for annual checks, unlimited in-home repairs, and coverage for defects/wear.
Offers plans for unlimited in-home repairs and coverage for defects/wear up to 3 years.
Explains connecting the power cord, including surge suppressor requirements and grounding.
Details the process of turning on the treadmill, including using the key and safety clip.
Explains how to start, control speed, and stop the walking belt in manual mode.
Guides users on downloading the iFit app and connecting their smart device to the console.
Explains the benefits of a chest heart rate monitor and its compatibility.
Details the process of connecting a BLUETOOTH Smart heart rate monitor to the console.
Describes how to access and use the console's information mode for settings and usage tracking.
Provides instructions on adjusting the desk height using the upright knobs.
Covers regular cleaning and upkeep of the treadmill for optimal performance.
Provides steps to resolve common issues like power not turning on or turning off.
Addresses issues causing the walking belt to slow down, with adjustment steps.
Guides on how to adjust belt alignment and tension when it's off-center or slipping.
Explains how to use heart rate zones for fat burning and aerobic exercise.
Provides recommendations for warming up, training zone duration, and cooling down.
Advises on the recommended frequency of workouts for maintaining fitness.
Instructions for performing a toe touch stretch to improve flexibility.
Instructions for a hamstring stretch to target leg and lower back muscles.
How to stretch calf and Achilles tendons for improved ankle mobility.
Technique for stretching quadriceps and hip muscles for better leg flexibility.
Steps to stretch inner thigh and hip muscles for increased range of motion.
