5, Have another person hoUdthe Consob (4) near the
Upright (2),
Connect the Upper Wire Harness (97) to the wire har-
ness on the Consob (4), Connect the Pube Wire (3) to
the puUsewire on the Consob, Next, bcate the two
ground wires that are connected with a screw to the
Upright (2), and connect the ground wires to the two
smallest wires on the Consob,
Carefully insert all excess wiring down into the Upright
(2), Attach the Console (4) to the Upright with four M4
x 16mm Screws (57), Be careful to avoid pinching
the wires. Next, press the bookrack onto the Console
in the indicated location,
6, Attach the Seat (9) to the Seat Frame (7) with four M6
x 20mm Button Screws (20) and four M6 Washers (60),
7, Attach the Seat Frame (7) to the Seat Carriage (11)
with two MIO x 52mm Button Bolts (82) and two MIO
Nylon Locknuts (63),
Bookrack
Ground Wires
Make sure the wires
do not get damaged
during this step.
63
7
To Next Page
Loading...
