NordicTrack SpaceSaver SE5i User Manual

7
3. If there is a shipping support attached to the
Front of the Frame (1), remove the screws from
the shipping support, and discard the screws
and the shipping support.
With the help of another person, place some
packing inserts from the packing material under
the Frame (1) so that the Frame is lifted off the
floor.
Attach the Front Stabilizer (73) to the Frame
(1) with two M10 x 120mm Screws (84). Then,
remove the packing inserts and lower the Front
Stabilizer.
3
4. With the help of a second person, lift the Upright
(2) upward into the upright position.
See the inset drawing. Tighten the Upright
Knob (85) into the Upright (2).
4
1
84
73
2
85
2

NordicTrack SpaceSaver SE5i Specifications

General

Brand	NordicTrack
Model	SpaceSaver SE5i
Category	Elliptical Trainer
Language	English