12
12. Attach the Console Frame (104) to the Handrails
(87, 88) with four 5/16" x 1 1/2" Bolts (4) and four
5/16" Star Washers (11).
12
104
87
88
4
11
4
11
11. IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten four
#10 x 3/4" Screws (9) about halfway into the
Handrails (87, 88). Next, slide the Crossbar as
far forward as possible. Then, tighten the four
Screws.
93
88
9
11
9
87
To Next Page
Loading...
