11
8. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove and discard the two indicated
Screws (B). Next, lift off the Crossbar (31).
B
31
Console
Assembly
B
8
9. IMPORTANT: To avoid damaging the
Crossbar (31), do not use power tools and do
not overtighten the #10 x 3/4" Screws (7).
Orient the Crossbar (31) as shown. Attach the
Crossbar to the Handrails (71, 72) with four #10
x 3/4" Screws (7) and four #10 Star Washers
(9) as shown. Start all four Screws, and then
tighten them.
Tighten the four 5/16" x 1" Screws (84) and
two 5/16" x 1" Button Head Screws (92).
31
71
9
9
72
9
7
7
92
84
84
92
To Next Page
Loading...
