Operation 4-7
4. Daily operation
baily startup procedure
TEMP
SET
PUMP
AIK
GUN AIR
.
’ Turn the main electrical switch ON at the applicator.
I.
2.
3.
4.
Verify that tank, hose, and gun temperature controls are at the
desired settings.
When all yellow LED indicators are flashing or off, adjust the pump
input air pressure to the desired setting.
(Systems with automatic guns only) Adjust the gun input air pressure
to the desired setting.
0 Nordson Corporation 1994.
All Rights Reserved
P/N 106 701A
41.23OOSP - &sued l/94
To Next Page
Loading...
