Need help?Do you have a question about the Nordson 3500V Series and is the answer not in the manual?
General| Pump Options | Gear pump, Piston pump |
|---|---|
| Hopper Capacity | 50 lbs (22.7 kg) |
| Temperature Control | PID |
| Temperature Range | Up to 450°F (232°C) |
| Heating Method | Electric resistance |
Overview of installation tasks, safety precautions, and optional features for the unit.
Crucial requirements and recommendations before starting unit installation procedures.
Criteria for selecting an appropriate installation location for the unit and associated equipment.
Step-by-step procedure for physically mounting the unit onto a surface.
Procedure to connect the necessary air supply to units equipped with piston pumps.
Guidance on installing various types of guns: air-operated, electric, and hand-operated.
Procedure for routing and connecting hoses to guns and the main unit.
Steps to safely open the electrical enclosure for accessing internal components.
Guide to connecting the unit to the main electrical power supply, including voltage specifications.
Modifying the unit to accept single-phase power supply instead of the default three-phase.
Final steps to securely close the electrical enclosure after completing installation.
Overview of system controls and how to begin programming unit operations.
Setting desired operating and standby temperatures for system zones.
Configuring pattern sets for controlling adhesive application to products.
Procedure for filling the unit's tank with unmelted adhesive.
Procedure to flush the system with adhesive before first operation.
To Next Page
