Need help?Do you have a question about the Nordson 3100V Series and is the answer not in the manual?
General| Melt Rate | Up to 100 lbs/hr (45 kg/hr) |
|---|---|
| Hopper Capacity | 50 lbs (22.7 kg) |
| Pump Options | Gear pump, Piston pump |
| Temperature Range | Up to 450°F (232°C) |
| Weight | Approximately 300 lbs (136 kg) empty |
Details what the section covers, including requirements for setup.
Specifies environmental and physical placement criteria for the unit.
Guidelines for proper electrical wiring connections to the unit.
Step-by-step instructions for securing the unit to a mounting surface.
Procedures for routing and connecting adhesive hoses to the unit and guns.
Instructions for mounting and connecting various types of adhesive guns.
Guide to safely connecting the unit to the main power supply.
How to program unit operations, temperatures, and clock functions.
Procedures for defining, programming, and storing adhesive patterns.
Steps to fill the tank, flush the system, and prepare for initial operation.
Forms to document customized system settings for reference.
Logging system faults and warnings for troubleshooting.
To Next Page
