Safety
Ins trirc tions
l-l
Section 1
Safety Instructions
1. Operate safely!
Safety recommendations contained in this section and throughout the
manual apply to tasks that may be performed on or with the unit or with
materials used with the unit. IT IS VERY IMPORTANT THAT THESE
SAFETY RECOMMENDATIONS ARE ALWAYS FOLLOWED.
FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY.
AND/OR DAMAGE TO THE UNIT OR OTHER EQUIPMENT.
With this in mind, here are some basic safety recommendations:
l
Read and become familiar with this Safety Instructions Section prior
to installing, operating, maintaining or repairing the unit.
l Store this manual within easy reach of personnel operating or
maintaining the unit.
l
Be familiar with and always observe safety symbols.
l Wear adequate personal protective equipment and clothing such as
safety goggles and gloves.
l
Familiarize yourself with and follow all safety instructions prescribed
by your company, general accident prevention regulations and
government safety regulations.
2. Safety symbols
The following symbols are used throughout the manual to warn against
dangers or possible sources of danger. Become familiar with them!
Failure to heed a warning symbol could lead to personal injury and/or
damage to the unit or other equipment.
WARNING: Failure to observe may result in personal injury,
death or equipment damage.
WARNING: Risk of electrical shock. Failure to observe may
result in personal injury or death.
WARNING: Disconnect equipment from line voltage. Failure
to observe may result in equipment damage, personal injury
or death.
WARNING: Hot. Risk of burns. Wear protective
clothing/safety goggles (ANSI 287.1-l 989 or
equal)/protective gloves (P/N 902 514) depending on the
symbol shown.
0 Nordson Corporation 1994
AU Rights Reserved
P/N 106 701A
41.2300SP - Issued 11’94
To Next Page
Loading...
