6
Part 7580607_01
E 2018 Nordson Corporation
Description - full assembly
The E360 rotary sieve, screens the reclaimed powder. The sieve and
hopper assembly supplies reclaimed powder for up to 30 powder coating
guns on the Venturi system and 32 on the HDLV, depending on the type of
powder and screen mesh. A 510 micron mesh screen is standard with
alternative options 160, 205, 245 micron in conductive carbon and 200, 250,
400 and 850 in nylon mesh. A three- phase AC electric motor drives the
sieve rotor. A variety of voltage and frequency ratings are available on
request.
Figure 1 360 Rotary Sieve + Hopper assembly
The Rotary Sieve + Hopper assembly is available in 6 variations.
3 for the 360 and 3 for the 650 (Ask Nordson for Appendix A for the 650)
Option Part Number Description Notes
1 7035235 Rotary Sieve 360 - HDLV
2 7035236 Rotary Sieve 360 - Venturi, O rganic
3 - Rotary Sieve 360 - Venturi P.E. A- B
NOTE A: Separate Accumulator needs to be ordered
B: Only available as part of an engineered system
To Next Page
Loading...