Nordson Fulfill - Parts; Using the Illustrated Parts Lists

Fulfill

Retrofit Kit − DuraBlue/VersaBlue 25L and 50L Melters
36
Part 1105309A
E 2010 Nordson Corporation
Parts
This section provides information about parts that are associated with the fill
system. Refer to the melter manual for information about all other melter
components.
Using the Illustrated Parts Lists
To order parts, call the Nordson Customer Service Center or your local
Nordson representative. Use these five‐column parts lists, and the
accompanying illustrations, to describe and locate parts correctly. The
following chart provides guidance for reading the parts lists.
The number in the Item column corresponds to the circled item number
in the parts list illustration. A dash in this column indicates that the item is
an assembly.
The number in the Part column is the Nordson part number
you can use to order the part. A series of dashes indicates
that the part is not saleable. In this case, you must order
either the assembly in which the part is used or a service kit
that includes the part.
The Description column describes the part and
sometimes includes dimensions or specifications.
The Note column contains letters that refer to notes at
the bottom of the parts list. These notes provide
important information about the part.
The Quantity column tells you how many of the part
is used to manufacture the assembly shown in the
parts list illustration. A dash or AR in this column
indicates that the amount of the item required in the
assembly is not quantifiable.
Item Part Description Quantity Note
— 0000000 Assembly A —
1 000000 S Part of assembly A 2 A
2 ‐ ‐ ‐ ‐ ‐ ‐ S S Part of item 1 1
3 0000000 S S S Part of item 2 AR
NS 000000 S S S S Part of item 3 2
NOTE A: Important information about item 1
AR: As Required
NS: Not Shown