NOREMAT Optima 51 - Page 12

Operator’s manual
Optima 51 / M51 / M56 / M57T / 60T
12
Dynapôle Ludres/Fléville, 166 rue Ampère/BP 60093 - 54714 LUDRES - FRANCE - Tél.+33 (0)3 83 25 69 60 - Fax. +33 (0)3 83 26 12 85
9 1Unloading
- Lift the machine with the help of a suitable gantry crane :
- travelling crane : use the lifting point shown by the symbol in the diagrams
on the previous pages.
- fork truck : use only if the necessary kit (red pieces) is tted to the machine ( gure 1.07)
Kit for fork truck lift:
(red pieces) tted
for the entry of the forks.
gure 1.07
Move clear of the lorry and t the adjustable stands to the machine
- Lower the machine slowly. Before it touches the ground, adjust the stands so that
it will remain level.
- Place the machine on the ground.
- Remove the parts tted for adapting it to the fork truck lifting means.
You now only need to hitch the machine to the tractor/carrying vehicle. See paragraph ‘Fittings and
mountings’.
General Safety Rules