NOREMAT Optima 51 - Page 21

Operator’s manual
Optima 51 / M51 / M56 / M57T / 60T
21
Dynapôle Ludres/Fléville, 166 rue Ampère/BP 60093 - 54714 LUDRES - FRANCE - Tél.+33 (0)3 83 25 69 60 - Fax. +33 (0)3 83 26 12 85
Technical characteristics
2 8Hydraulicpumppressures
Hydraulic pump service pressures
Charge feed circuit for rotor pump
18 bar
(+ or - 3 bar)
Rotor hydraulic circuit 300 bar
Movement hydraulic circuit (valve block) 220 bar
These pressures are set at the factory.
Never attempt to adjust these pressures.
Contact your NOREMAT technician to seek assistance.