Noritz NRCB199DV - Setting Domestic Hot Water Temperature (DHW)

14
* The indicator is lit.
*
To return to the home screen, press the
button or let panel sit for
approximately 20 seconds.
1
Press the buttonON.
2
Press the buttontwice.
The current "DHW
Temperature Setting" and
"DHWIcon"willbeblinking.
Set the temperature using
the
buttons
.
(e.g.: 10:15AM)
(e.g.: 110°F)
Setting Domestic Hot Water Temperature (DHW)
Operation ScreenDisplay Description
OperationPanelDisplay
High Temperature
Topreventscalding:
Flashes for 10 sec
DANGER
HotWatertemperaturesover125°F(52°C)cancause
severeburnsinstantlyordeathfromscalding.
•
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, check with installer.
• When setting the unit to 125°F (55°C in °C mode) or higher,
the DHW High Temperature Icon will ash for 10 seconds and
emit a tone as a high temperature warning.
• Take caution when using the unit again after setting to 125°F
(52°C) or higher. Always check the set temperature before use.
• Do not allow anyone to change the water temperature while hot
water is running.
1
2
2