Need help?Do you have a question about the NORSELIGHT XENON R50 Series and is the answer not in the manual?
General| Category | Marine Equipment |
|---|---|
| Power | 50W |
| Voltage | 24V DC |
| Color Temperature | 6000K |
| IP Rating | IP66 |
| Housing Material | Aluminum |
| Light Source | Xenon |
Company background, commitment to quality, and contact information.
Details on warranty validity, exclusions, and return procedures.
Describes the construction of searchlights XS 500-3000, including materials.
Details the R50 motor housing construction and internal components.
Lists functions of Main, Slave, and Wireless Operation Panels.
Lists specifications of the Ethernet switch, including ports and mounting.
Explains the function and technology of the wireless panel access point receiver.
Lists key features, benefits, and compliance of the wireless receiver unit.
Details the NP-0725 rectifier for 1000W Xenon lamps, including specifications.
Covers switch settings for different power outputs and safety shutdown procedures.
Describes the EX-30 G/1 power supply for 250-500W Xenon lamps.
Describes the PX-50 N rectifier for 1000W Xenon lamps and its control devices.
Describes the EX-100 D/1 power supply for 1000-3000W Xenon lamps.
Describes the N3-80/N3-150 rectifier power supplies for Xenon lamps.
Provides a detailed description of the NP-0725 single-phase rectifier.
Details the EX-30 G/1 power supply, including dimensions and weight.
Describes the P-X50 (N) C power supply, including components and dimensions.
Shows layout and dimensions for the EX-100 D/1 electronic power supply.
Details dimensions and weight for the N3-80/N3-150 rectifier power supplies.
Comprehensive technical data for various Xenon searchlight models, including dimensions and performance.
Details standards, network, interface, power, and environmental specs for main/slave panels.
Details standards, network, interface, power, and environmental specs for the wireless panel.
Lists specifications, approvals, and limits for the KIEN1005 network switch.
Details regulatory compliance, range, radio, antenna, and physical specs for the access point.
Covers mounting requirements and electrical connection details for the system.
Specifies BUS communication cabling requirements and the system start-up procedure.
Explains the functions of LED indicators, selection, focus, speed, lamp, and joystick controls.
Provides safety warnings and steps for lamp replacement and general searchlight maintenance.
Lists spare parts with corresponding part numbers for different searchlight models.
Provides mechanical dimensions and data for XS 500 to 3000 R50 searchlights.
Shows dimensions for the Pedestal R50 and cutouts for operation panels.
Displays dimensions and connection information for the Switch BUS unit.
Illustrates the network topology for the R50 system with components and connections.
Provides descriptions for various system components like searchlights, panels, and cables.
Step-by-step guide on how to construct a T568B standard LAN cable.
Summarizes cable functions, specifications, and connection points for Xenon systems.
Shows electrical installation diagrams for different searchlight models and power supplies.
Details how to make LAN and other connections within the junction box and between panels.
Shows detailed internal wiring diagrams for various searchlight models.
Details input/output connections and current specifications for the N3-80/150 E power supply.
A blank page intended for owner's notes and remarks.
To Next Page
