- 18 -
The sensor collects changes in temperature, pressure and altitude
at all times.
There are some discrepancies when the air pressure and altitude
are affected by the pressure and temperature.
1.Compass: Hold the strap and let the dial
mark “8” in the air to correct the compass.
Enter the compass: the central number
represents the angle between the direction
of the Red Arrow and due North direction.
2.Timing mode
Stopwatch: Enter Stopwatch Mode to
turn on/Stop the timer, and reset the data.
Countdown: can be set by the default
time to start/Stop Countdown, can also be
customized to set the countdown time. The
watch vibrates at the end of the countdown.
3.Altimeter: A Graphic Representation of the change in altitude of
the environment over the last 4 hours. Unit: Meter.
4.Barometer: a graph showing the pressure changes in the
environment for the last 12 hours. Unit: hpa.
5.Temperature: plot the change in ambient temperature over the
last 12 hours. Unit: degrees centigrade.
To Next Page
Loading...
