- 17 -
Using Scenario: if you are climbing a mountain or taking an
elevator, measure the relative height created by the climb by
setting the height to zero at the foot of the mountain or at the
beginning of the climb.
Click on the GPS correction, you need connect to the outdoor
GPS signal in order to successfully obtain absolute height. When
entering outdoor activities such as running, climbing or cycling,
the altimeter will be connected to the GPS signal and the absolute
height of the location will be obtained by GPS rectification.
4.GPS: the combination of GPS, beidou, and GLONASS satellites,
depending on the area in which they are located.
5.Resume factory settings: confirm whether factory original settings
need to be resumed.
6.Shutdown: confirm whether shutdown is required.
7.Version: HPlusFit QR code, watch SN Bluetooth number, software
version.
20.Outdoors：
To know environmental changes well, we can start with a
comprehensive data graph.
From the outdoor interface, Swipe left/press START to enter the
compass-timing mode-altimeter-barometer-temperature interface.
To Next Page
Loading...
