4.When the watch is off, press the BACK button for 3 seconds,
and the screen turns on and enters the standby user interface
5.On standby status, press the BACK button for 3 seconds and
the screen turns off
6.When the watch appears abnormal or out of control, long
BACK button for 10 seconds can force the watch to restore original
settings.
4.Touch screen controls:
1.Scroll up and down, flip the page
2.Swipe left: start/enter
3.Swipe right: back
5.Charging instructions:
1.Press the charging clip lightly so that the contacts of the clip are
aligned with the charging port above the bottom of the watch.
In order to make full contact, the step under the clamp contact
must be wedged into the notch of the watch metal contact.
2.Once you have the clip in place, connect it to your computer or
phone’s power adapter using a USB charging cable.
3.The watch shows a red charging screen and when it is turned
on, it indicates that the watch has started being charged.
- 3 -
To Next Page
Loading...
