EasyManua.ls Logo

Northgate OmniKey - Using the Omnikey Keyboard; Using the Typewriter Keys

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Omni Key Keyboard User's Guide
Using the Computer keyboards work in conjunc-
OmniKey Keyboard tion with computer software. The
best way to learn about your Omni-
Key keyboard is to use it with your
software. However, many software
packages lack good documentation;
therefore, the following information
can help you understand how to get
the most out of your keyboard.
Using the Typewriter Using the typewriter keys is very sim-
Keys ilar to using a typewriter. One impor-
tant difference is the computer key-
board keys are repeating. Notice if
you hold a key down, the character
will repeat itself until you let the key
up. To adjust this rate, see Key Re-
peat Rate on pages 11-13. Some of the
typewriter keys have special functions:
ESC - is used for a variety of purposes
by various software packages. Con-
sult the documentation of the soft-
ware you are using for information
about ESC.
CAPS LOCK - Locks the keyboard so
only capital letters are entered when
an alphabetic key is pressed. CAPS
LOCK is a toggle key. Press it to turn
CAPS LOCK on; press it again to turn
CAPS LOCK off. CAPS LOCK differs from
the Shift Lock on a typewriter. It
locks only the 26 letter keys in the cap-
itals mode. Number keys, punctua-
tion keys, and all other special keys
are not affected by CAPS LOCK.
SHIFT - The SHIFT keys on either side
of the keyboard work like the Shift
keys on a typewriter. Use SHIFT to
enter upper case letters or the upper
symbols on the number and punctua-
tion keys. When CAPS LOCK is on,
SHIFT acts as an un-shift, and lower
case letters will be entered.
27