Omni Key Keyboard User's Guide
Using the Function
Keys
Many programs use the function keys
in conjunction with other keys to per-
form special operations. One common
use of three of the function keys is en-
tering MS-DOS commands. Refer to
the list below:
F1 Press this key. It will redisplay
one character of the previously en-
tered DOS command each time it
is pressed.
F2 Press this key and then a character
from your previously entered DOS
command. The previously entered
command, up to the character you
have entered, will be redisplayed.
F3 Press this key. The entire pre-
viously entered command will be
redisplayed.
31
To Next Page