NorthStar Multi-Function Unit M121 - 8 Satellites

Northstar M121/M84 Installation and Operation Manual 31
5 To remove a waypoint from the route:
i Select the waypoint to remove.
ii Press
MENU
and select Remove.
6 Repeat this process until the route is finished.
7 Press
ESC
.
8 Display the route on the chart (see section
6-2-3) and check that the route does not
cross land or dangerous water.
7-2-2 Editing a route
Editing a route from the chart
1 In the routes window, select the route to
edit. Press
MENU
and select Edit on chart.
2 The selected route is displayed on the chart,
with a circle around the first waypoint.
3 Edit the route as described in section 6-2-1
A, starting at step 4.
Editing a route from the routes window
1 In the routes window, press
or to
highlight the route to edit. Press
MENU
and
select Edit.
2 The selected route is displayed: the route
name and a list of the waypoints.
3 Edit the route as described in section 6-2-1 B,
starting at step 3.
7-2-3 Displaying a route on the chart
To view the selected route at the centre of the
window:
1 In the routes window, press
or to
highlight the route to window. Press
MENU
and select Display.
Or, in the Chart window, press
MENU
, select
Find, then select Route. Select a route from
the list.
2 The Instrument displays the selected route
on the chart.
7-2-4 Deleting a route
1 In the routes window, press or to
highlight the route to delete. Press
MENU
and
select Delete.
2 Select Yes to confirm.
7-2-5 Deleting all routes
1 In the routes window, press
MENU
and select
Delete all.
2 Select Yes to confirm.
7-2-6 Navigating a route
See section 3-1-3.