Northstar M121/M84 Installation and Operation Manual56
To load a file to the Instrument:
1 Select the file to load.
2 Press
MENU
and select Load.
Deleting a file from the user card
1 Select the file to delete.
2 Press
MENU
and select Delete.
3 Select
Yes to confirm.
Rereading the file information
This reads the file names from the user card and
displays them. Reading does not load any file
data into the Instrument. You should not need
to do this.
1 Press
MENU
and select Card.
2 Select Read.
Formatting the user card
Formatting prepares a user card for use. Format
the card if there is an error message saying that
the card is not formatted. Any data files on the
card are deleted.
1 Press
MENU
and select Card.
2 Select Format.
3 Select Yes to confirm.
Sorting the file names
This sorts the displayed file names.
1 Press
MENU
and select Sort.
2 Select sort by Name, Type or Time.
!
WARNING
Do not format a chart card.
To Next Page
Loading...