Outer end at inside of long half shaft of rear
axle (up to 52 horsepowers)
Intermediate section of Shaft I in the gear box
Outer end at inside of long half shaft of rear
axle (55-60 horsepowers)
Driven bevel gear of second-stage reduction of
front drive
Rear end of the driving bevel gear base of
front drive
Rear end of the auxiliary clutch shaft
in the gear box
Differential lock operating shaft
Where the pressure oil pipe
meets the gear pump
Outer end at inside
of long half shaft of rear axle
Driving bevel gear of
second-stage reducton of front drive
Where the oil-suction pipe
meets the gear pump
Where the pressure oil pipe meets the lifter
Where the connecting plate of inlet oil pipe
meets the housing of lifter
Seal for the crank of brake
Location for sealing the transfer case and the
rear-axle housing
Seal of the fork shaft of transfer case
Between the drive shaft
and sleeve of the transfer case
Seal for the crank of brake
Driven bevel gear of first-stage
reduction of front drive
Driving bevel gear of first-stage
reduction of front drive
Driven bevel gear of final-stage
reduction of front drive
Where the front bracket of
front drive meets the housing
Where the front supporting shaft of
front drive meets the base
Where the rear base meets the housing
Rear end of the rear base of front drive
Oil inlet of the distributor
Oil inlet of the distributor
To Next Page
Loading...
