•
Replace the oil and oil filter.
•
Replace the lubricant in the gearbox.
Step 3. Open the gear box cover
on the floorboard. Remove the
dipstick and check the oil level. It
should not exceed the maximum
level.
Step 1. Screw off the four bolts on
the magnetic cover and release
the gear oil.
Step 2. Clean up the cover and
add sealant. Replace the back
cover. Ensure the cover is fully
sealed.
Replace with a new oil filter.
Screw off the
lid and replace
with a new air
filter.
To Next Page
Loading...
