Nortrac 40XTD - Page 37

Page 37 / 48
Maintenance
Interval
Maintenance Point
•
Replace the lubricant in the final drive cases.
•
Replace the fuel filter.
•
Clean up the muffler.
Step 1. Open the plug with the
hex wrench and empty the oil
from the final drive case.
Step 2. Put the sealing
washer on the plug and then
insert the plug.
Step 3. Screw off the plug tap
and fill the oil into tank.
Step 4. Open the plug and
check the oil lever.
Step 5. To install back the
plug and ensure sealed.
Fuel filter
Step 1. Fuel filter in the front
right of the radiator.
Step 2. Remove filter cover
and replace fuel filter.