Notifier HS-NCM - User Manual

12 Clintonville Road
Northford, CT 06472-1610 USA
203-484-7161 • FAX 203-484-7118
www.notifier.com
High-Speed Network Communications Module
Product Installation Document
PN 54014:B2 04/25/2014 14-0370
1 Product Overview
The High-Speed Network Communications Module (HS-NCM) provides a means for connecting specific Notifier fire
alarm control products to High-Speed NOTI•FIRE•NET™. There are six types of HS-NCMs available: HS-NCM-W for
connecting nodes with twisted-pair wire; HS-NCM-MF and HS-NCM-SF are used for connecting nodes with fiber-optic
cable; HS-NCM-WMF and HS-NCM-WSF are used for connecting nodes with fiber-optic cables to nodes with twisted-
pair wire; HS-NCM-MFSF for connecting nodes with multi-mode fiber cable to nodes with single-mode fiber cable. The
following equipment may be used with the HS-NCM:
* - Power for the HS-NCM for use with UL 9th Edition panels is provided via the NUP connection on the FACP itself or an external UL/ULC listed power supply.
** - Power for the HS-NCM for use with UL 8th Edition panels must be provided by a 24 VDC UL/ULC listed power supply.
The following revisions
†
of the UL 9th edition panels require a 24 VDC UL/ULC listed power source to power the HS-
NCM and can not be powered via the panel’s NUP port
‡
:
† The revision and assembly name can be found on the fire panel’s circuit board.
‡ NUP Port connections are still required for communication between the HS-NCM and the fire panel.
One HS-NCM can provide network communication for up to two nodes (including fire alarm control panels and network
annunciators).
Per UL 864 9th Edition, the HS-NCM uses Active Multiplex Type 3 Communication.
The HS-NCM can also be configured as a high-speed repeater for applications requiring distances beyond the specified
limits between two nodes. For configuration and setup information, refer to “HS-NCM Configuration” on page 5. For
limitations and network wiring information for the HS-NCM, refer to the High-Speed Noti•Fire•Net Manual.
For instructions on the additional capabilities available with the DVC-EM, refer to the DVC and DAA Series Installation
Manual.
• Input power requirements: 24 VDC, 0.400 A, regulated, power-limited compatible power supply UL/ULC listed for
fire protective signalling use.
• Communications circuit requirements: Refer to the High-Speed Noti•Fire•Net Manual for segment length limitations.
UL 9th Edition* UL 8th Edition**
• NFS2-3030 • NFS-3030
• NFS2-640 • NFS-640
• NFS-320 • NCA
•NCA-2
•DVC-EM
• ONYXWorks
NFS-320 CPU2-640PCB Revision E or older
NFS2-640 CPU2-640PCB Revision E or older
NFS2-3030 CPU2-3030PCC Revision I or older
DVC-EM DVC-EMPCB Revision F or older
DVC DVC-PCA -All Revisions
NCA-2 NCA-2PCC Revision I or older
NOTE: All wiring connections are supervised and power limited.

Summary

Product Overview

HS-NCM Wire Module

HS-NCM Fiber Module

HS-NCM Wire;Fiber Module

HS-NCM Configuration

Configuration Methods

Describes two methods for connecting VeriFire Tools to the HS-NCM for configuration.

HS-NCM Parameters

Details HS-NCM parameters like IP, MAC, Port modes, and VDSL speeds for setting.

Configuring as a High-Speed Repeater

Explains how to configure the HS-NCM to function as a high-speed repeater.

Installation

Mounting Options

Details various chassis and door mounting configurations for the HS-NCM modules.

Interconnecting HS-NCM Models

Covers wiring for HS-NCM-W and fiber optic models, including mixing wire and fiber.

Cable and Power Specifications

Lists approved cables, distances, and external power requirements for HS-NCM.

Diagnostic Indicators

LED Indicators and Status

Explains the function, color, and state of each diagnostic LED on the HS-NCM.

Supplemental Documentation

Notifier HS-NCM Specifications

General

Operating Voltage	24 VDC
Function	Network Communications Module
Wiring	Twisted pair, shielded
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	10% to 93% non-condensing
Compatibility	Notifier fire alarm control panels
Description	Provides network communication between fire alarm control panels and other devices