To Next PageTo Next Page
Need help?Do you have a question about the Notifier 1010 and is the answer not in the manual?
General| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
|---|---|
| Relative Humidity | 10% to 93% non-condensing |
| Type | Fire Alarm Control Panel |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Battery Backup | Up to 18 Amp Hour Batteries |
| Communication Options | optional IP communicator, optional cellular communicator |
| Dimensions | 14.5" H x 3.5" D |
| Compliance | UL 864 |
Details the panel's display interface, keypad functions, and button operations for system control.
Describes cabinet dimensions and loop hardware configurations for different panel models.
Explains loop wiring standards, device termination, and wiring for various input/output modules.
Explains system communication interfaces, printer/laptop connections, and annunciator setup.
Outlines programming methods, menu structure, control-by-event logic, and programming examples.
Details how to configure system-wide settings, install boards, and set global parameters.
Guides on configuring individual device types, events, labels, options, and mappings for system points.
Covers device management, security, logging, type identification, and specific programming examples for SCS-8.
