997-492-000-5, Issue 5
June 2009
2
EN 54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
As a default, the panel is configured without delays to
outputs. If delays are to be configured, refer to Section
7.8 Primary & Secondary Delays for details.
While every effort is made to ensure the accuracy of the
content of this manual, the manufacturer reserves the right
to change the information without notice.
Installation
The control panel is easy to install providing the
recommended procedures described in this manual are
followed. Once the back box is installed, use something
suitable, such as an anti-static bag, to protect the PCBs
from being damaged. Do not re-fit the front cover until after
all other trades have completed their tasks.
Commissioning
Section 6, Commissioning describes the recommended
commissioning procedure for the fire control panel.
Configuration
Section 7, Configuration describes all panel configuration
procedures. Configuration is only possible with the control
panel at access Level 3. This requires the front cover to be
removed and a code-entry process to make the panel ready
for site-specific configuration.
Specification
Section 8, Specification defines all panel operating
parameters.
1.4 CE Marking
This panel is CE Marked to show that it conforms to the
requirements of the following European Community
Directives:
The EMC Directive 2004/108/EEC, by the application of
the following EMC Standards:
EN 61000-6-3: Electromagnetic Compatibility (EMC)
Generic emission standard for Residential, Commercial
and Light industrial environments
EN 50130-4: EMC Product family standard: Immunity
requirements for components of fire, intruder and social
alarm systems.
Low Voltage Directive 2006/95/EEC, by the application of
the safety standard:.
EN 60950-1: Safety of information technology
equipment.
The Construction Products Directive 89/106/EEC, by the
application of the following standards:
EN 54-2: Fire detection and fire alarm systems - Control
and indicating equipment.
EN 54-4: Fire detection and fire alarm systems - Power
supply equipment.
To Next Page
Loading...
