Need help?Do you have a question about the Notifier AFP-400 and is the answer not in the manual?
General| Model | AFP-400 |
|---|---|
| Type | Fire Alarm Control Panel |
| Manufacturer | Notifier |
| NAC Circuits | 4 |
| Battery Backup | Yes |
| Power Supply | 120 VAC, 60 Hz |
| Battery Capacity | 7 Ah (minimum) |
| Communication | RS-485 |
| Operating Temperature | 0°C - 49°C (32°F - 120°F) |
| Relative Humidity | 93% RH non-condensing |
| Communication Ports | 1 RS-232 port, 1 RS-485 port |
General description of the AFP-300/AFP-400 Fire Alarm Control Panel.
Key functionalities and capabilities of the fire alarm control panel.
Identification of the main parts of the control panel.
Introduction to control panel elements and their functions.
Explanation of the panel's LED indicators and their meanings.
Description of the five main control keys and their operations.
How the system functions when no alarms or troubles are present.
How the panel operates and displays when a fault is detected.
Panel behavior and functions during a fire alarm event.
Panel response to supervisory signals, distinct from alarms.
How non-fire points activate Control-by-Event functions.
Operation of modules monitoring external equipment for troubles.
Functionality and features of the panel's NAC circuits.
How the system uses software zones for automated control logic.
Configuration and operation of releasing zones and related timers.
Features and operations specific to intelligent detectors.
How the system detects and reports pre-alarm conditions.
System clock and time-based control features.
Configuration of NAC output coding types.
How PAS and presignal modes affect alarm handling.
Configuration of Silence Inhibit, Auto Silence, and Alarm Verification timers.
Operation of waterflow type monitor points.
How disabling points affects system operation.
Trouble detection and handling for Style 6 SLC wiring.
Introduction to accessing system status information.
Steps to access the Read Status menu.
Available options for reading point and history data.
How to view the status of specific points and zones.
Detailed status information for individual devices.
Display of status information for a given zone address.
Overview of the panel's event and alarm history logs.
How to access and view the general event history log.
How to access and view the specific alarm history log.
Accessing and printing the hidden history file.
Displaying and understanding presignal delay settings.
Displaying configuration details for releasing zones.
Displaying settings for time-based control zones.
Displaying programmed holiday dates for zone control.
Displaying NAC coding selections based on zone F8.
Displaying configuration for the pre-alarm zone (F9).
Viewing and understanding system-wide parameters.
Configuring displays for ACS annunciators.
Introduction to the Voice Alarm System features.
Key capabilities of the voice evacuation subsystem.
Overview of topics covered within the Voice Alarm Systems section.
Introduction to the Audio Message Generator.
Operational aspects of the AMG-1/AMG-E.
Instructions for operating the AMG-1.
How to select factory or custom messages.
Setting AMG tones and messages via DIP switches.
Details on Fire Fighter's Telephones, including components and operation.
Overview of audio amplifier models and their features.
Details on the AA-30 audio amplifier circuit board and components.
Details on the AA-100/AA-120 audio amplifier circuit board and components.
Procedure for adjusting audio amplifier gain.
How to select the backup tone for AA-100/AA-120 amplifiers.
Installing VROM and VRAM chips for custom messages.
To Next Page