Need help?Do you have a question about the Notifier AFP-300 and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | AFP-300 |
| Category | Control Panel |
| Language | English |
Provides a summary of the AFP-300/AFP-400 intelligent Fire Alarm Control Panel's features.
Details the physical components and ports of the AFP-300/AFP-400 control panel.
Lists controls and indicators and their corresponding information sources in the manual.
Explains the function and status of the eight system status LEDs on the control panel.
Describes the function of the five control keys on the panel: Acknowledge/Step, Alarm Silence, Alarm Activate, System Reset, Lamp Test.
Describes Normal, Trouble, Fire Alarm, and Supervisory signal modes of operation.
Covers non-alarm points, trouble monitor points, NACs, and Control-by-Event.
Details releasing functions, intelligent detectors, pre-alarm, and time control.
Explains coding functions, PAS, special timers, and circuit operations.
Instructions on how to enter and exit the Read Status mode on the control panel.
Details options for reading point status, zone status, and system history.
Covers presignal delay, releasing zones, time control zones, holiday zones, NAC coding, and pre-alarm zones.
Explains how to read system parameters and configure annunciator displays.
Introduces the Voice Alarm System and provides setup guidance.
Details the AMG-1/AMG-E for tones/messages, including features and selection methods.
Covers ATG-2 tone generator operation and Fire Fighter's Telephones (FFT-7/FFT-7S).
Explains audio amplifier models, features, adjustment, and AMG voice message options.
To Next Page