Need help?Do you have a question about the Notifier AM-6000 and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | AM-6000 |
| Category | Control Panel |
| Language | English |
Procedure for measuring line resistance, must not exceed 40 Ohm.
Procedure for verifying line isolation between system components.
Measures resistance between shield and line for isolation verification.
Measures resistance between earth and line for isolation verification.
Measures resistance between shield and system earth for isolation verification.
Verifies output voltage and checks for polarity inversion.
General trouble signal for any power supply issue.
Indicates low mains voltage or mains loss issues.
Trouble signal for mains voltage below 170 Vac.
Trouble signal for auxiliary power voltage below 170 Vac.
Trouble signal for battery charger voltage below 170 Vac.
Trouble signal for main power supply voltage exceeding 263 Vac.
To Next Page