Need help?Do you have a question about the Notifier NFS-3030/E and is the answer not in the manual?
General| Model | NFS-3030/E |
|---|---|
| Type | Intelligent Fire Alarm Control Panel |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Operating Voltage | 24 VDC |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Humidity Range | 10% to 93% non-condensing |
| SLC Style | Style 4, 6, or 7 |
| Dimensions | 5.25" D |
| Intelligent detectors | Supports up to 318 intelligent detectors |
| NAC circuits | 4 (Class A/B) |
| Battery Charging Current | 3.0 A |
| Maximum SLC Devices | 318 |
| Notification Appliance Circuits (NACs) | 6 |
| NAC Style | Style Y (Class B) or Style Z (Class A) |
| Auxiliary Power Output | 24 VDC, 0.5 A |
Allows viewing of detailed device status information without entering a password.
Explains how to acknowledge detected off-normal events.
Details how the panel signals a fire alarm condition to the operator.
Provides steps for operators to take when a fire alarm occurs.
Describes how the panel signals system or point trouble conditions.
Provides steps for operators to take when a trouble condition occurs.
Describes how the panel signals a pre-alarm condition.
Provides steps for operators to take for a pre-alarm event.
Describes how the panel signals a security alarm condition.
Provides steps for operators to take for a security alarm.
Describes how the panel signals a supervisory condition.
Provides steps for operators to take for a supervisory event.
To Next Page
