Supervisory Signal Event Operation of the Control Panel
NFS-3030 Operating P/N 51344:C 11/4/03 33
is cleared. Latching supervisory type codes are WATERFLOW S, LATCH SUPERV, and
SPRINKLR SYS.
The panel will send a system normal message to the History buffer, installed printer and
annunciators.
How to Interpret Type Codes
The Type Code that displays in the Supervisory message indicates the function of the point that
initiates the Supervisory. For example, a monitor module with a WATERFLOW S Type Code
means that the module monitors the state of a waterflow switch. If the Type ID code is unfamiliar,
refer to "Software Type ID Codes" on page 59. This appendix is an alphabetical list of Type ID
codes and an explanation of each.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
