To Next PageTo Next PageTo Previous PageTo Previous Page
Why does my Nova Power Tool chuck body not run true?
Excessive runout in the Nova Power Tool chuck is often due to poor mounting of the chuck inserts or body, or mechanical issues like debris or inaccurately machined parts. To determine the level of runout, follow the runout inspection procedure using a dial gauge as described in the section below.
What to do if Nova PRO-TEK G3 insert jams when threading?
If the insert jams when partially threaded into the Nova Power Tool body, check for damage to the insert and chuck body threads. Ensure the insert has properly engaged with the chuck body thread, and inspect both threads for debris buildup.
General| Brand | Nova |
|---|---|
| Model | PRO-TEK G3 |
| Category | Power Tool |
| Language | English |
Key features and advantages of the PRO-TEK G3 chuck.
Essential safety precautions for operating the chuck and lathe.
Step-by-step guide to attaching chuck jaws securely.
Instructions for safely detaching chuck jaws.
Guide to using the woodworm screw for workpiece mounting.
Critical safety warnings when forming workpiece features.
Detailed steps for creating a mortise or recess in a workpiece.
Detailed steps for creating a tenon or spigot on a workpiece.
Method for checking and diagnosing chuck runout issues.
Procedure to inspect the lathe spindle for proper alignment.
Procedure to inspect the chuck after mounting on the spindle.
Procedure to inspect chuck jaws for proper seating and alignment.
List of tools needed for chuck maintenance and disassembly.
Important safety warnings before disassembling the chuck.
Identifies key parts for cleaning and inspection during disassembly.
Important safety warnings before reassembling the chuck.
Details specific warranty terms for international customers.
