LED Display Controller Thunderview_S1
User Manual
2 Overview
The S1 is NovaStar's new generation of Thunderview series display controller
especially designed for high-end display applications. With multiple I/O connectors
and control connectors, it is ideal for different applications, such as broadcasting and
television, indoor high-end screens with fine pitch, rental for stage, security monitoring,
etc.
The S1 has 3G data transmission bandwidth. A single coaxial connector can support
up to 1920x1080@60Hz and the device supports up to 3840x1080@60Hz. Benefiting
from the SerDes technology, the S1 can realize zero-frame latency.
Connection of hardware devices to the S1 is shown in the figure below. The device
must be powered off before connection.
Figure 2-1 Hardware device connection
To control multiple S1 units, cascade them according to the figure below.
Figure 2-2 Cascade
XI'AN NOVASTAR TECH CO., LTD.
To Next Page
