Manual ready
Please review your settings before proceeding. Once satisfied, press "Start" to
activate the machine. However, before doing so, please read page 16 for
instructions on how to load filament into the machine. If you are not satisfied
with the settings, press the "Back" button to adjust them.
Manual stop
To halt the process, press the red "Stop" button. Never turn off the machine to
stop the pelletizing process; always press "Stop" first to prevent potential motor
damage.
Shutdown Procedure:
When finished, switch off the machine using the MAINS POWER SWITCH.
These instructions ensure safe and efficient operation of the pelletizer.
15
To Next Page
Loading...