EasyManuals Logo

NPower Smart energy display User Manual

NPower Smart energy display
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Smart prepayment
Emergency credit
Got a low credit alert and not topped up? Your display will show you if you’ve any emergency credit available.
Only select this as a last resort if you can’t top up straight away.
Out of credit
If you run out of credit, your supply could be disabled. You’d then need to top up
with sufficient credit to cover all the charges before you reactivate your meter.
For gas you’ll need to activate the meter by following the instructions on the gas
meter itself.
For electricity you can also activate the meter from your display. Go to settings from
the main menu and select enable electricity supply
Checking debt – and debt recovery rates
If you’re paying o debt through your meter, you can check the amount and the agreed
recovery rate within settings from the menu button.
To activate the emergency credit, press the menu button
and go to settings
and select activate emergency credit – this then shows as ‘selected’ on the screen.
When your meter balance is used up, it will show the emergency credit in use.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NPower Smart energy display and is the answer not in the manual?

NPower Smart energy display Specifications

General IconGeneral
BrandNPower
ModelSmart energy display
CategoryMonitor
LanguageEnglish