Need help?Do you have a question about the NPower Smartpower and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Maximum Load | 16A |
| Voltage Measurement Accuracy | ±1% |
| Measurement Range | 0-16A, 0-240V |
| Operating Temperature | 0°C ~ 40°C |
| Input Voltage | 100-240V AC |
| Power Supply | 100-240V AC |
Explains the sensor, transmitter, and display unit communication for energy monitoring.
Provides contact details for technical support and further inquiries.
Steps to inspect meter, cabling, and monitor condition before installation.
Guidelines to follow during the monitor installation process to ensure safety.
Instructions for setting the correct time on the display unit.
Guide to inserting batteries into the transmitter unit.
Steps to wirelessly connect the transmitter and display units.
Instructions for identifying and attaching the sensor to the correct meter cable.
Explains the speedometer, speed, milometer, target, tariff, and communication symbols.
Identifies the Up, Down, and Set buttons for navigation and input.
How the speedometer shows current electricity consumption up to 22kW.
Explains viewing consumption in £/h, kW, or kgCO2/h.
How to view electricity usage for today, yesterday, or the last 7 days.
Guide on setting daily electricity usage targets in kWh, £, or kg CO2.
Instructions for entering electricity tariff rates from your bill.
What the flashing battery symbol means and how to replace batteries.
Explains the symbol indicating successful pairing and communication.
Advice for sensor placement when meter diagrams don't match.
Solutions for transmission range, communication failures, flashing symbols, and battery indicators.
Covers data retention, display reset, and monitor power consumption.
Explains reading differences, tariff info, and calculation methods.
Guidance on what to do if the monitor stops working.
To Next Page
