NSD NCV-20NBNVP - Nomenclature; Part Identification; Display and Setting Area Functions

7. NOMENCLATURE
7-1. Part Identification
Current position
value setting switch
Monitor LEDs
-Position data output indicator
-Sensor disconnection indicator
-Latch pulse indicator
-HOLD input indicator
Sensor connector
I/O connector
Power terminal block
-M4 screw
7-2. Function and Name of Display and Setting Area
Rear face
Switch
-Position data increase direction setting:
-Switch DOWN: CW direction
-Switch UP: CCW direction
LP: Lights when latch pulse
output is ON (LOW).
HD: Lights at HOLD input.
SE: Lights at sensor
disconnection.
0 to12: Displays position data
as binary or gray binary.
Function setting switches:
See section 8.3 (Position
Data Reading Setting)
LED function for monitor
20